Abstract: This paper investigates the effects of tool holder materials on chatter vibration in turning operations. The study uses a complex dynamic turning model with two degrees of freedom for the orthogonal cutting system. Tool holders made from different materials, including Al 5083, Al 6082, Al 7012, and a standard 4140 material, were subjected to chatter vibration to investigate their process damping capabilities. The study found that the standard... More

Abstract: The effect of vibration (50 Hz) on the formation of aluminum castings of 99.5% purity at various cooling rates was studied. It was found that the presence of vibration leads to an increase in the cooling rate of the castings. It was found that the higher the speed without vibration, the stronger the effect of increasing the speed when vibration was applied. Apparently, this effect is associated with additional mixing of the melt by free-floating... More

Abstract: This work briefly describes some of the different features of groups ofmetals. It highlights recent progress in research into metals. It details thestructures and defects in solid metals. The common theories of metalsincluding the free electron theory, band theory, the ions in a sea ofelectrons model and the soft sphere model are discussed and their meritsare considered. It describes distinctions between the bonding in metalsand inter-metallic... More

Abstract: In this study, the reason for erosion-corrosion of drinking or mains water in the faucet was investigated by computational fluid dynamics. Pipes used in homes, the service sector, and industry are responsible for transporting different types of fluids from one place to another. Considering the faucet design, the SolidWorks program was used for 3D studies. In-faucet flow analyses were performed using Ansys Fluent, a computational fluid dynamics... More