Abstract: The influence of deposition modes on the phase-structural state, corrosion resistance, and adhesive strength of vacuum-arc multi-period NbN/Cu coatings is studied. It was found that in thin layers (about 8 nm, in a constant rotation mode), regardless of the change in the pressure of the nitrogen atmosphere, a metastable δ - NbN phase forms (cubic crystal lattice of the NaCl type). At a layer thickness of ~ 40 nm or more, a phase composition... More

Abstract: Magnesium (Mg) alloy is the lightest metal material found because of its excellent physical and mechanical properties, specific strength, biocompatibility and biomechanical compatibility, therefore, it has very promising development prospects in aerospace, automobile manufacturing, and biodegradable materials. However, due to the relatively chemical properties of magnesium alloys, poor corrosion resistance, fast degradation rate, and poor wear... More

Abstract: According to LNƐ, theoretical & true elongation of tensile, and by adopting the increasing function of formulas with the derivation and analogy methods, the elongation formula of 0<(1+ε)1/ε<e & 0<ε1/ε<1& four convergences are deduced too when ε >1 and 0<ε<1.The inequalities of LNε <ε and LN(1+ε)<ε and LN(1+ε)> LNε are deduced if ε>1 and 0<ε<1 in material dynamics. Finally the conclusions of LNε... More

Abstract: This paper covers the role of anisotropy, temperature, and strain rate on the flow behavior of the material when a conical die is used instead of conventional blank holder. The effect of anisotropy was investigated using Lankford’s coefficient (r) in three directions (0°, 45°, and 90°). The effect of working temperatures (Room temperature, 100°C - 300°C) on drawing stress and strain rate sensitivity on punch pressure were also investigated in... More