Welcome to Bilingual Publishing Group
View

Journal of Building Material Science

ISSN: 2630-5216 (Online)

  • Article

    Properties of Sawdust Concrete

    Onyechere, Ignatius Chigozie
    1-9

    Article ID: 109968    DOI:https://doi.org/10.30564/jbms.v4i2.4818
    1527  (Abstract) 995  (Download)

    Abstract: This work examined the structural properties of concrete obtained by partially replacing cement with sawdust ash. The sawdust ash which is a pozzolan was obtained by burning sawdust which is a waste product from processing of timber in an open air. The burnt ash was passed through a 150 µm metric sieve to obtain the ash used. Physical and chemical analysis were performed on the ash to verify its suitability as a partial substitute for cement in... More

  • Article

    Heating, Ventilation and Air Conditioning Design for Commercial Complex Buildings: Theory and Method Based on Inverse Problem

    Yu Zhang
    10-15

    Article ID: 110161    DOI:https://doi.org/10.30564/jbms.v4i2.5167
    469  (Abstract) 598  (Download)

    Abstract: Scientific and technological progress and innovation help the design industry, which plays an important role in sustainable development. It will improve the operation efficiency of enterprises and explore a blue sea for enterprise. In essence, design should be the process of deriving the optimal scheme from different schemes or imaginary scenes. Based on this, this paper proposes an overall optimization method for Heating, Ventilation and Air... More

  • Article

    Effect Of Quartz Particle Size and Cement Replacement on Portland Limestone Cement properties

    Kachallah Bukar Gubio, Muhammad Mukhtar Ismail, Olubajo Olumide Olu
    16-25

    Article ID: 110115    DOI:https://doi.org/10.30564/jbms.v4i2.5091
    811  (Abstract) 783  (Download)

    Abstract: This research focuses on investigating the effect of quartz particle size and cement replacement on their physicomechnical properties. Portland limestone cement (PLC) was employed and replaced with quartz powder (QP) at various particle sizes (1.19 mm, 425 µm, 300 µm, 212 µm, <212 µm) and cement replacement between 2.5 wt.% ~ 15 wt.% at interval of 2.5 wt.% to study their impact on the cement properties. The PLC chemical composition revealed... More

  • Article

    Impact of Polymer Coating on the Flexural Strength and Deflection Characteristics of Fiber-Reinforced Concrete Beams

    Salih Kocak, Kasim Korkmaz, Erkan Boztas
    26-35

    Article ID: 110240    DOI:https://doi.org/10.30564/jbms.v4i2.5304
    676  (Abstract) 653  (Download)

    Abstract: Liquid polymers (LP) have become an important structural material used in the construction industry in the last decade. This paper investigates the viability of using commercially available LPs as a coating material to improve the flexural strength of fiber-modified concrete beams. The scope included preparing rectangular prism concrete beams with a concrete mixture including fly ash and fiber and coating them with four different liquid polymers... More

  • Article

    Thermal Analysis of Concrete Mixtures with Recycled EPS Aggregates

    Aisha Ayoubi, Emilio Sassine, Joseph Dgheim, Joelle Al Fakhoury, Yassine Cherif, Emmanuel Antczak
    36-45

    Article ID: 110203    DOI:https://doi.org/10.30564/jbms.v4i2.5251
    876  (Abstract) 913  (Download)

    Abstract: Reusing recycled waste materials in buildings is gaining more and more attention for what it offers economic, environmental, and energy benefits; and many researchers are nowadays working on producing new sustainable construction materials incorporating recycled wastes. In this scope, this work uses an experimental approach aiming at understanding the effect of incorporating Expanded Polystyrene (EPS) beads in concrete and proposing thermally... More