Abstract: The construction industry needs modern construction methodology and technology to improve sustainability and production performance. Building Information Modelling (BIM) technology supports improving the quality of products by reducing design and construction defects, risks to the health and safety of workers, and reduce overall project cost and delivery time. The BIM has capabilities, but it is still undiscovered and unable to exploit the full... More

Abstract: The variations in the viscoelastic behavior of asphalt concrete due to testing mode is assessed and modeled in the present investigation. Asphalt concrete mixture was prepared at its optimum binder requirement and compacted in slab mold with the aid of roller compaction. Beam specimens of 62 mm width, 400 mm length, and 56 mm depth were extracted from the slab samples and tested using controlled stress and strain techniques under dynamic... More

Abstract: As a byproduct of the steelmaking process, significant amounts of hazardous electric arc furnace dust (EAFD) are produced. Utilizing the solidification/stabilization technology with asphalt mix is one way to safeguard the environment from its negative effects. Rutting was used as an indicator to assess the asphalt mixture with EAFD since it is an important factor in pavement design. This study's major goal is to ascertain how EAFD affects the... More

Abstract: The purpose of this paper is to provide understanding of the seasonal pattern of air leakage (infiltration) in Chinese vernacular buildings across China’s five climate regions. In achieving the set purpose, a grand extensive literature survey was conducted and supported with data drawn from established Meteonorm V6.1 on sensible heat and psychrometric variables. Numerical computations for normalized and specific infiltration from stack effects... More

Abstract: Cost overrun is common problem in construction projects worldwide. Most Indian construction projects, particularly those involving high-rise buildings, have had severe cost overruns. For managers, architects, engineers, and contractors, completing building projects within the specified cost budget has become the most important and hard assignment. Since it is common for high-rise building projects to go over budget, the aim of this study is to... More

Abstract: In the current work, concrete mixes containing (7.0-33.11) weight % silica fume as a partial replacement of cement with a water /cement ratio (0.42-0.48) were prepared according to an adopted two factorial central composite design. The samples were tested, optimized, and modeled for compressive strength and density.  The estimated results confirmed that compressive strength and density increase with increasing silica fume content up to 11.9... More