Welcome to Bilingual Publishing Group

Circular Ribbon Antenna Array Design For Imaging Application

Authors

  • Rajinikanth Yella Email Electrical Engineering Computer Science (EECS), NCTU, Taiwan, China
  • Krishna Pande Electrical Engineering (EE), NCTU, Taiwan, China
  • Ke Horng Chen Electrical Engineering (EE), NCTU, Taiwan, China

DOI:

https://doi.org/10.30564/jeisr.v3i1.3550
Received: 11 August 2021 | Published Online: 23 August 2021

Abstract

Our goal is to develop THz module on chip to visualize bone grinding at
the early stage so that arthritis can be visualized and treated early. A critical
component of such module is antenna. A compact 4 by 4 beamforming
antenna array for biomedical application is presented in this paper. We
are proposing a novel antenna which is in the form of a circular ribbon
shape with a gold patch. Gold material for the patch is used to enhance its
conductivity and to cut down backward radiation. Differential port pin used
to increase the bandwidth. Au-posts are finally used for output connection.
The proposed antenna operates over the frequency band from 201 GHz to
more than 228 GHz. Directivity and gain of the proposed antenna are 13
dB and 7 dB respectively. This makes it applicable for imaging systems
because of the frequency band for biomedical imaging. Index Terms—
Beamforming antenna, antenna array, Advanced design system (ADS),
Biomedical imaging.

Keywords:

Beamforming antenna, Antenna array, Advanced design system (ADS), Biomedical imaging

References

[1] M. Jenning, B. Klein, R. Hahnel, and D. Plettemeier, “On-Chip Integrated Antennas for 200 GHz Applications,” in 2015 IEEE International Conference on Ubiquitous Wireless Broadband (ICUWB), 2015, pp. 1-5.

[2] B. Goettel, P. Pahl, C. Kutschker, S. Malz, U. R. Pfeiffer, and T. Zwick,“Active Multiple Feed On-Chip Antennas With Efficient In-Antenna Power Combining Operating at 200-320 GHz,” IEEE Trans. Antennas Propag., vol. 65, no. 2, pp. 416-423, Feb. 2017.

[3] E. H. Frequency, “Supporting innovation in the 100-200 GHz range Proposals to increase access to Extremely High Frequency (EHF ) spectrum,” no. March, 2020.

[4] S. Gupta, S. Bag, K. Ganguly, I. Sarkar, P. Biswas, and F. I. Conference, Advancements of Medical Electronics. 2015.

[5] S. A. Naghdehforushha and G. Moradi, “Design of plasmonic rectangular ribbon antenna based on graphene for terahertz band communication,” IET Microwaves, Antennas Propag., vol. 12, no. 5, pp. 804-807, Apr. 2018.

[6] A. Abohmra, H. Abbas, S. F. Jilani, A. Alomainy, M. A. Imran, and Q. H. Abbasi, “High Bandwidth Perovskite based Antenna for High- Resolution Biomedical Imaging at Terahertz,” in 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2019, pp. 503-504.

[7] Rajinikanth Yella, Krishna Pande, Ke Horng Chen, Edward Chang 28 GHz Monolithic Transmitter on GaN chip for 5G application. The Tenth International Conference on Advances in Satellite and Space Communications SPACOMM 2018.

[8] Rajinikanth Yella, Krishna Pande, Ke Horng Chen, Edward Chang Design of On-Chip GaN transmitter for wireless communication, International Journal On Advances in Telecommunications 2018.

[9] R. HafeziFard, M. Naser-Moghadasi, J. Rashed-Mohassel, and R.-A. Sadeghzadeh Sheikhan, “Mutual Coupling Reduction for Two Closely- Space Meander Line Antennas Using Metamaterial Substrate,” IEEE Antennas Wirel. Propag. Lett., vol. 15, pp. 1-1, 2015.

[10] Xin Mi Yang, Xue Guan Liu, Xiao Yang Zhou, and Tie Jun Cui, “Reduction of Mutual Coupling Between Closely Packed Patch Antennas Using Waveguided Metamaterials,” IEEE Antennas Wirel. Propag. Lett., vol. 11, pp. 389-391, 2012.

[11] P. Simon, “Analysis and Synthesis of Rotman Lenses,” in 22nd AIAA International Communications Satellite Systems Conference Exhibit 2004 (ICSSC), 2004, no. May, pp. 1-11.

[12] S. Vashist, M. K. Soni, and P. K. Singhal, “A Review on the Development of Rotman Lens Antenna,” Chinese J. Eng., vol. 2014, no. 11, pp. 1-9, 2014.

Downloads

Issue

Article Type

Article